Review: KEF Universal Wireless System
Lose the Wires, Not The Sound
January 2008 By Marshal M. RosenthalThe manual is thin because it’s extremely easy to get this up and running. Start by placing the wireless receiver labeled “left” on the left side of the room and then the other on the right. Each receiver has a power supply to plug into an AC socket (and is always on), plus there are two knurled knobs for attaching wires to the surround speaker. Power is supplied to each speaker by an internal 50-watt amplifier inside the receiver.
The last step includes placing the wireless transmitter near your amplifier or HTiB and aiming it towards the receivers (just don’t place it on top of the amp so as to avoid heat buildup, or anywhere the signal might be blocked). Then insert the provided cable into the transmitter and attach the speaker leads on the other end to the amplifier’s left and right surround speaker outputs. Finally, plug in the AC cord and turn the transmitter on. Blue LEDs on the transmitter and receivers should now light up to show that they “see” each other—if they blink instead, check that everything is plugged in and powered and that the connections to the speaker outputs are tight (I had the blue light solid the first time). Then, adjust the surround speaker settings in the amplifier as you would normally and sit back to enjoy surround sound.
So I’m flipping through the noisiest, loudest scenes from the HD DVD of “Face Off” with the Dolby Digital and giving the surrounds a real workout—every thud, screech of metal and explosion is loudly circling around me like a Blackhawk helicopter out of control. KEF is right when they say their wireless technology doesn’t require any special coddling because there’s no way I would have thought the surrounds were wireless if I hadn’t already known. And don’t think surrounds are only for big bangs either as they can add unexpected ambiance—for example, as found on some of the Pixar short films now available on a Volume 1 DVD collection.

